Assembly Instructions - Fein BOP6 Series Instruction Manual

OBJ_BUCH-0000000221-001.book Page 12 Tuesday, July 21, 2015 8:42 AM
en
12

Assembly instructions.

Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Mounting the auxiliary handle
(figure 2).
To loosen the clamping strap of the auxiliary
handle, turn the handle counterclockwise.
Slide the strap of the auxiliary handle in the
desired working position onto the collar until
the teeth engage into the recesses, and then
tighten.
2.
3.
1.
4.
3.
2.
1.
5.