Fein KBH25 Instruction Manual page 16

OBJ_BUCH-0000000032-002.book Page 16 Thursday, July 21, 2011 8:17 AM
en
16
Switching on and off (figure 7).
Check the power supply cable
WARNING
and the plug for damage.
Always hold the power tool
CAUTION
firmly. Otherwise, you could
lose control over the power tool.
Switching on:
Press the On/Off switch. The speed increases
the more you press the On/Off switch.
Switching off:
To switch off the power tool, release the
On/Off switch.
Locking on:
Press the On/Off switch to the stop and press
in the Locking button.
Release the On/Off switch.
For switching off, briefly press the On/Off
switch until the Locking button disengages.
Release the On/Off switch.
Using the swarf cup (figure 8).
Use the swarf cup for overhead work.
Chippings and the core are
CAUTION
sharp and hot!
Mount the swarf cup onto the tool holder.
Swarf cup
On/Off switch
Locking button
On/Off switch