Table of Contents
Advertisement
Chapter 4
System Start-Up
Chapter Summary
4 8
Figure 1.19
System Start up procedure for the 1770 M12 System
POWER
Select
Insert power cord
position 1
1.
Insert the connector end of the power cord into J19.
2.
Insert the plug into the power outlet.
3.
Select position 1 of the POWER switch. The POWER indicator lights
green; if it does not, refer to chapter 5 for troubleshooting aids.
Refer to the PC/M User's Manual, publication 1770-6.5.1, (formerly 1770-821)
for information on operating the PC/M with the 1770-M12 system.
In this chapter you read how to:
begin operations for your 1770-M10
begin operations for your 1770-M11 system
begin operations for your 1770-M12 system
The next chapter describes how to troubleshoot your mass storage system.
MASS STORAGE SYSTEM
M12
POWER
Indicator
lights green
11975
Advertisement
Table of Contents
