Table of Contents
Advertisement
Quick Links
Release Notes
Enpac 2500 Data Collector Version 3.10
Catalog Number 1441-PEN25 and 1441-PEN25-Z
When to Use These Release
Notes
These release notes correspond to the Enpac
firmware revision 3.10.
The release notes provide the following information.
Topic
Use these Enpac 2500 operating system versions with the indicated Emonitor software
versions.
Enpac 2500 Operating System Version
3.10
3.0
2.0
1.03
If you send your Enpac 2500 data collector in for service, our service department will
IMPORTANT
upgrade the operating system to revision 3.10. Make sure you backup any of your data
before sending the unit for service.
®
2500 operating system update,
Page
2
3
7
11
12
Emonitor Software Version
3.5
3.4
3.3
3.2
Advertisement
Table of Contents
Related Manuals for Allen-Bradley 1441-PEN25
Summary of Contents for Allen-Bradley 1441-PEN25
-
Page 1: Table Of Contents
Release Notes Enpac 2500 Data Collector Version 3.10 Catalog Number 1441-PEN25 and 1441-PEN25-Z When to Use These Release ® These release notes correspond to the Enpac 2500 operating system update, firmware revision 3.10. Notes The release notes provide the following information. -
Page 2: Safety Information
2 Enpac 2500 Data Collector Version 3.10 Safety Information Be aware of these safety precautions. Avoid Water IMPORTANT The Enpac 2500 data collector is splash and dust resistant. However, avoid direct contact with water, wet surfaces, or condensing humidity. Keep this instrument away from wet locations, for example, laundry, wet basements, swimming pools. -
Page 3: Enhancements
Table 1 - Enhancements with Revision 3.10 Cat. No. Enhancement 1441-PEN25 The Route Manager screen provides functions such as, Delete, Reset, and Open a Route. The screen displays the routes you have loaded or have in internal memory. 1441-PEN25-Z On the Route Data Collection screen, a taken POINT count is shown in a caption bar, rather than showing a missed POINT count below the Route hierarchy. - Page 4 Table 1 - Enhancements with Revision 3.10 Cat. No. Enhancement 1441-PEN25 The Addnl Measts option on the Enpac 2500 data collector has been replaced by the Multi-meas View on the Enpac 2500 data collector. This is where you select which measurements have signature shown. For measurements...
- Page 5 Enpac 2500 Data Collector Version 3.10 5 Table 2 - Enhancements with the Enpac 2500 data collector, firmware revision 1.03…3.0 Operating Enhancement Description System Version Speed Storage The Enpac 2500 can now save the cursor frequency value as speed. The 1XRPM that appears during data collection can be used to set the machine speed based on cursor position.
- Page 6 6 Enpac 2500 Data Collector Version 3.10 Table 2 - Enhancements with the Enpac 2500 data collector, firmware revision 1.03…3.0 Operating Enhancement Description System Version 1.03 Improved Route A Navigation parameter has been added to the Setup screen that allows you to choose how you move through routes in the Data Navigation Collection and Review Data screens.
-
Page 7: Corrected Anomalies
Enpac 2500 Data Collector Version 3.10 7 Corrected Anomalies This sections describes the anomalies corrected by the Enpac 2500 data collector, firmware revisions 1.03…3.10. Table 3 - Corrected Anomalies with Firmware Revisions 1.03…3.10 Operating Description System Version 3.10 CORRECTED: In some instances, the Bump Test and Recorder modules just get an hour glass but does not go into the program. CORRECTED: After incorrect installation, the Runup Coast Down module does not Show Setup menu. - Page 8 8 Enpac 2500 Data Collector Version 3.10 Table 3 - Corrected Anomalies with Firmware Revisions 1.03…3.10 Operating Description System Version 3.10 CORRECTED: After installing Enpac 2500 data collector revision 3 Hotfix 2, if you collect data on a measurement point and then try to delete the reading, the instrument errors out TourDBException - cannot find signature tuple.
- Page 9 Enpac 2500 Data Collector Version 3.10 9 Table 3 - Corrected Anomalies with Firmware Revisions 1.03…3.10 Operating Description System Version 3.10 CORRECTED: Offroute does not take displacement from Accel in Time format. ICM00000921 CORRECTED: Using SD Card, formatted as Fat32, you need to take 2 sets of data for the same route. ICM00000933 CORRECTED: Further to the Orbit issue, there is another problem concerning Gap Voltage measurements from proximity probes.
- Page 10 10 Enpac 2500 Data Collector Version 3.10 Table 3 - Corrected Anomalies with Firmware Revisions 1.03…3.10 Operating Description System Version CORRECTED: When setting the following parameters OffRoute and applying a 60 Hz sine wave at 100 mV Pk with a -1V DC offset: •...
-
Page 11: Known Anomalies
Table 4 - Known Anomalies with Firmware Revision 3.10 Cat. No. Description 1441-PEN25 The Enpac 2500 data collector does not store an Off Route Machine Name change. The name appears to changed but does not store the change. It reverts to original name when unloading. -
Page 12: Operating System Update Procedures
12 Enpac 2500 Data Collector Version 3.10 Operating System Update Download the Enpac 2500 .zip upgrade file from http://www.rockwellautomation.com/support/. Click Downloads > Firmware Procedures Updates > Condition Monitoring. We recommend that you delete all older versions of the installer loader .msi files from IMPORTANT your computer before updating the Enpac 2500 data collector’s operating system. - Page 13 To confirm which modules that are installed and the version by press F3 (About) on the Main Screen. Table 6 - Data Collector Modules Cat. No. Module Version 1441-PEN25-MOD-BAL Balancing Upgrade 1441-PEN25-MOD-BMP Bump Test 1441-PEN25-MOD-FRF FRF - Frequency Response Function...
- Page 14 8. The installation procedure is ready, click Next. The Enpac OS Loader installs. 9. From the Windows Start menu, click Start > Programs > Allen-Bradley > Enpac2500 > Enpac2500 OS Loader. At the beginning of the upgrade process, a message is shown saying that the upgrade can take a long time, depending on the selections made.
- Page 15 Enpac 2500 Data Collector Version 3.10 15 The option to Backup any Module Data, for example, Balance jobs or .wav file recordings. 11. Decide if you need to backup data. We recommend that you click yes to backup your data. Next, you are given the option to backup any Routes.
- Page 16 16 Enpac 2500 Data Collector Version 3.10 At this stage, you can see the OS programming occur on the unit. Remember that this process can take some time. You should see the firmware upgrade appear on the Enpac 2500 screen. Once the programming of the new OS is complete, you need to perform a Hard reset/Cold reboot.
- Page 17 Enpac 2500 Data Collector Version 3.10 17 The OS Loader then completes the final stages of the upgrading the Firmware, by automatically restoring any backed up files, for example, Calibration Data, License Files, and Module Data and Routes. 17. Determine if you need to install any modules. 18.
-
Page 18: Important
Any Modules that were licensed prior to the upgrade will still be licensed. Any Modules that are installed, but which have not been licensed will appear greyed out as unavailable. To active greyed-out modules, contact your contact your local Allen-Bradley distributor or Rockwell Automation sales representative. Use the table Data Collector Modules on page 13 to identify what modules you need to order. - Page 19 Enpac 2500 Data Collector Version 3.10 19 Restarting the Data You should restart the Enpac 2500 data collector if the instrument locks up and does not respond to any key presses including the On/Off key. Collector When you need to reset the data collector you can perform a hard or soft reset. A hard reset resets the defaults vales of the date, time, and time zone.
- Page 20 Provides the declarations of conformity, certificates, and other certification details. You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative. Rockwell Automation Publication GMSI10-RN004B-EN-E - August 2012...
- Page 21 Enpac 2500 Data Collector Version 3.10 21 Notes: Rockwell Automation Publication GMSI10-RN004B-EN-E - August 2012...
- Page 22 Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/. Allen-Bradley, Rockwell Software, Rockwell Automation, Enpac, Emonitor, Dynamix, Datapac, LASERTACH, and TechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.