Table of Contents
Advertisement
Connecting to the PLC 3
Peripheral Communication
Module
Figure 1.8 shows how to connect the peripheral communication module to the
1770-M11 system. Use the twinaxial cable (cat. no. 1770-CD) to connect each
product and perform these steps:
Figure 1.8
How to Connect the 1770 M11 System to the Peripheral Communication
Module
1775 GA
Peripheral
Communication
Module
1770 CD
Blue
Twinaxial
Cable
Shield
Clear
1.
Match the power outlet voltage to the mass storage system's voltage. For
example, if your power outlet is 220V AC then change the electrical card
to 220V AC. (Refer to chapter 4.) We ship each mass storage system for
a 120 V AC operation.
2.
Connect one end of the twinaxial cable to the peripheral communication
module (Figure 1.9):
Chapter 3
Installing Your Mass Storage System
To another Peripheral Communication Module
1770 M11
Mass Storage System
11964
3 7
Advertisement
Table of Contents
