Connecting To The Programmable Controller/Management System . 3 - Allen-Bradley 1770-M10 Assembly And Installation Manual

Connecting to the
Programmable
Controller/Management
System
Figure 1.15 shows how to connect the Programmable Controller/Management
System (PC/M) to a 1770-M12 system. Use the cable (P/N 966289-01) to
connect each product and perform these steps:
Figure 1.15
How to Connect the 1770 M12 System to the PC/M System
1770-M12
Mass Storage System
1. Match the power outlet voltage to the mass storage system's voltage. For
example, if the power outlet is 220V AC then change the electrical card to
220V AC. (Refer to chapter 4.) We ship each mass storage system for a
120V AC operation.
Chapter 3
Installing Your Mass Storage System
PC/M
Front View
PC/M
Back View
PORT 0 PORT 1 PORT 2 PORT 3
P/N 966289-01
Connector Cable
11971
3 13