Table of Contents
Advertisement
Chapter 4
System Start-Up
1770-M10 Mass Storage System - Back View
120V AC 50 60Hz 5A 250V FUSE
POWER
J19
Select Position 1
4 6
Important: If you are using a series A 1770-M11 system, you still must use the
series A operating system diskette to load the operating system. If you intend to
use a series B 1770-M10 system with a series A 1770-M22 system, you must:
1.
load the 1770-M10 system through the 1770-M11 system using the series
B operating system
2.
load the 1770-M11 system using the series A operating system
before using. For this purpose, we enclose a series B operating system diskette
with each series B 1770-M10 or -M11 system.
To load the operating system program from its micro-floppy onto the DMIM,
follow these steps (Figure 1.18):
Figure 1.18
How to Load the Operating System Program from its Micro floppy
When the micro-floppy
seats properly
into the access slot
this indicator lights green
If you do not have the operating system program on a micro-floppy, then your
mass storage system will automatically load the program from the hard disk
drive.
PARALLEL CHANNEL IN J21
PARALLEL CHANNEL OUT J20
Face labels up
Indicator lights green
11974
Advertisement
Table of Contents
