Table of Contents
Advertisement
Chapter 3
Installing Your Mass Storage System
1775 GA
Peripheral
Communication
Module
Blue
Shield
Clear
3 10
Figure 1.11
You can Connect up to Three 1770 M10 Systems to the Peripheral
Communication Module
1770 CD
Twinaxial
Cable
1.
By hand, remove the internal single inline packs (SIPs) located on the
Disk Controller Module of the 1770-M11 system. Refer to Figure 1.12.
Figure 1.12
Remove the Single Inline Packs (SIPs) Located on the Disk Controller Module
2.
Set the switch assembly of the 1770-M10 system to a unit number. Only
use the unit numbers 1, 2, and 3. Refer to table 3.A. for the switch
assembly settings. if you connect more than one 1770-M10 system, each
To another Peripheral Communication Module
1770 M11
Mass Storage System
1770 M10
Mass Storage System
Single Inline Packs (SIPs)
P/N 966189 01
Connector Cable
To another
1770 M10 system
11968 I
11967
Advertisement
Table of Contents
