Re-Assigning Device Keys; Using Keymover; Programming Keymover - Radio Shack Kameleon Owner's Manual

REASSIGNING DEVICE KEYS
The Radioshack 6-in-1 Remote can be set to control
a second device. For example, to control a TV, a
cable box, and two DVD players, you can reassign
the unused AUD key to operate the second DVD
player as follows:
Press and hold P until the bottom IR segment
1.
flashes twice. The Program Keys will appear.
Press MODE " once.The Mode Mover
2.
programming screen will appear:
3. For the source mode, press a device key once
(i.e., CBL/SAT, CD, TV, DVD, AUDIO, VCR). For
this example, press DVD once. The selected
device menu screen, including HOME, will be
displayed.
NOTE: Only one device can be assigned to an
unused device key at a time.
4. For the destination mode, press a device key
once (i.e., CBL/SAT, CD, TV, DVD, AUDIO, VCR).
For this example, press CD once.Upon
reassignment, the bottom IR segmentwill flash
twice as confirmation. The Program Keys will
appear again.
5. For this example, the CD key is now ready to be
set up to control your second DVD player. See
"Programming Device Control" on page 7. If
desired, repeat steps 2 to 4 to reassign another
device.
6. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
.

USING KEYMOVER

The Radioshack 6-in-1 Remote includes a
Keymover feature that allows you to map (or copy)
keys from one mode (i.e., source mode) to another
mode (i.e., destination mode).
NOTE: Do not use any of the Device Keys as a source
or destination key. Also, do not use POWER as
a destination key.
P K
ROGRAMMING EYMOVER
For example, if your DVD player does not have
volume control, you can map those keys (i.e.,
VOL!, VOL#, and MUTE) from the TV mode to
DVD mode as follows:
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
2. Press OTHER once. The Other programming
screen will appear:
3. Using the Number Keys, enter 9 9 4. The
bottom IR segmentwill flash twice.
4. For the source mode, press a desired device
key once (i.e., AUX, CBL/SAT, CD, TV, DVD,
AUDIO, VCR, or PVR). For this example, press
TV once.The selected source device menu
screen, including HOME, will be displayed.
5. For the source key, press a key to be moved
once. For this example press VOL! once.
Reassigning Device Keys/Using Keymover 19
O ' M
WNER S ANUAL