Features And Functions; Key Charts - Radio Shack Kameleon Owner's Manual

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the
Radioshack 6-in-1 Remote Powered by Kameleon
and then refer to the Key Charts (starting on the
right) to learn how they function.
NOTE: The illustration shows all remote
control keys. In actual operation, only active keys
used by the selected device are displayed and non-
active keys are hidden.
To find out what type of devices can be controlled
by each device key after programming, see the
"Device Table" on page 6.
K C .
EY HARTS
Features And Functions/Features And Functions 3
O ' M
WNER S ANUAL
When a key is pressed, the IR
Segment will animate.
Outgoing animation (see
arrows) indicates the remote
control is sending IR signals
to a selected device.
Incoming animation (see
arrow) indicates the remote
control is receiving IR
signals from a device being
learned (see Using Learning
on page 17)
During programming, the
bottom IR segment flashes
to confirm setup actions.
Press a Device Key once to
select a desired home
entertainment device to
control (e.g., DVD).When
selected, the Device Key will
animate to indicate it is
currently active.Also see the
"Device Table" on page 6.
After programming, press
the My System key once to
select the home theater
mode (see "Using My System
Mode" on page 11).
During programming, the
HOME key will appear. Use it
to exit the program screen or
to return to the last-selected
device key screen.
Press POWER once to turn a
selected device on or off.
Use P to enable the
programming screen.
Press SLEEP to turn on the
sleep function. See "Setting
the Sleep Timer" on page 14.
In the My System and CBL/
SAT modes, use PAGE+ or
PAGE– to page up or down
through channels in the
program guide.