Lock Device - Radio Shack 15-310 User Manual

4. To check the third digit, press and hold SET, then
press 3. The red LED will flash repeatedly to indicate
the third digit.

Lock Device

Lock the device code in your remote so it doesn't get
changed or deleted unintentionally.
To lock in the code for your current device:
1. Press the device key that you want to lock on your
universal remote.
2. Hold down SET, then press 7. The red LED blinks
twice. The code for the current device is now locked
and cannot be overwritten.
3. To unlock the current device key, press and hold SET,
then press 8. The red LED blinks twice.
n
Note:
• The locked devices cannot be changed until you
unlock the current device key or reset your remote.
• To unlock a code other than the current one, press that
device key before following step 3.
10