Contents Features ..............3 Introduction .............. 4 Preparation ............... 5 Installing Batteries ..........5 Setting Up Your Remote Control ......6 Operation ..............8 Converting the CBL Key ........8 Reassigning the CBL Key ........8 Restoring the CBL Key ........9 Using Volume Lock ..........
Features Your RadioShack 2-in-1 Universal Remote Control al- lows you to control both your TV and cable converter with one easy-to-use, compact remote control. Its fea- tures include: Last Station Recall — lets you go from the station you are currently watching to the last one at the touch of a button.
Introduction Your Radio Shack 2-in-1 Remote Control was designed to control the most commonly-used functions on your TV and cable converter. When you set up the remote control, its command keys operate the same as the keys on your original TV and Cable remote controls.
Your remote requires three AAA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries. When batteries become low, the remote control will cease to operate in order to protect stored settings. Re-...
Note: Do not place objects on top of the remote control after you have installed the batteries. Doing so might de- press keys for an extended period of time and reduce the battery life. SETTING UP YOUR REMOTE CONTROL You can use the remote control’s device keys to control the following types of devices: –...
Page 7
Note: If you entered the code incorrectly, the red light blink once. 5. Point the remote control at your TV (or cable con- verter) and press . The device should turn POWER off. If the remote does not operate your device, try the other codes listed in “Manufacturers’...
Operation The command keys on the remote control work the same way as their counterpart keys on the original re- mote controls. However, they might be labeled different- 1. Point the remote control at the device you want con- trol and press its device key ( ).
Restoring the CBL Key When you are finished using your second TV, you can restore the key to control a cable converter. 1. Hold down until the red light blinks twice. 2. Press . The red light blinks twice. 9 9 2 3.
3. Press . The red light blinks four times. VOL+ MANUAL CODE SEARCH If your TV or cable converter does not respond to remote control commands after trying all of the codes listed for your brand, or if your brand is not listed at all, try search- ing for your code.
Page 11
4. To view the code for the first digit, press . Count the number of blinks (for example, 3 blinks = 3) and write down the number. Note: The red light does not blink if the code digit is a 0. 5.
• Use the supplied label to record the manufacturers’ codes for your remote-controlled devices. • A key on the remote control that has the same name as a key on your original remote control may have a slightly different function. RadioShack Manufacturer Code Number Cat. No. Cable Converters...
Page 13
RadioShack Manufacturer Code Number Cat. No. Garrard 0153 Gemini 0015, 0797 General Instru- 0476, 0276, 0810 ment GoldStar 0144 Goodmind 0797 Jasco 0015, 0153, 0315 Jerrold 0003, 0012, 0476, 0276, 0014, 0015, 0810 Memorex 0000 Movie Time 0063 0063 0019...
FCC authorization to op- erate it. If your remote control is not performing as it should, take it to your local RadioShack store for assis- tance. If the trouble is affecting the telephone lines, the phone company can ask you to disconnect your remote control until you have resolved the problem.
Specifications Power .............. 3 AAA Batteries IR Control Range ......... 26 ft 30 degrees Dimensions (HWD) ........6 (165 32 mm) Weight (Without Batteries) ..........3.2 oz (90.1 g) Specifications are typical; individual units might vary. Specifica- tions are subject to change and improvement without notice. Specifications...
Page 24
(b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batter- ies;...
Need help?
Do you have a question about the 2-in-1 Remote Control and is the answer not in the manual?
Questions and answers