Operation; Converting Device Keys - Radio Shack 4-IN-1 REMOTE CONTROL Owner's Manual

15-1991.fm Page 8 Wednesday, October 20, 1999 10:37 AM

OPERATION

1. Press the device key for the device you
want to control.
2. Point the remote control toward the device
you want to control, then press the desired
command keys.
3. Repeat Steps 1 and 2 for all other devices
you want to operate.
Note: The command keys on the remote
control work the same as the keys on the
original remote control; however, the label-
ing might differ slightly.
4. To turn off the last device you selected,
press . To turn off other devices,
POWER
press the device key for the device you
want to turn off, then press

CONVERTING DEVICE KEYS

You can use the 4-in-One Remote to operate a
second TV or VCR (or other components) for a
total of up to four devices. To do this, you must
first convert an unused device key (
, ) to operate each additional device.
CBL AUX
For example, to convert
ond TV:
1. Hold down until the red light blinks twice.
P
2. Press . The red light blnks twice.
9 9 2
3. Press .
TV
4. Press . The red light blinks twice.
AUX
5. Program the converted device key (
with the code for the second TV. (See
"Setting Up Your Remote Control" on
Page 6.)
Repeat these steps for each key you want to
convert. To convert a key back to its original
8
.
POWER
, ,
TV VCR
to operate a sec-
AUX
)
AUX