Download Print this page
Radio Shack Wireless Security Keychain Remote Owner's Manual

Radio Shack Wireless Security Keychain Remote Owner's Manual

Wireless security keychain remote

Advertisement

Quick Links

Wireless Security
Keychain Remote
Use your wireless keychain remote to arm and disarm your Wireless Security Kit
(49-1000). Your Wireless Security Kit includes one keychain remote, and you can purchase
up to 15 additional keychain remotes (16 total) to use with your system. Your keychain can
also control devices connected to remote modules (such as a lamp) that are controlled by
your Wireless Security System. Your keychain includes random digital security coding for
enhanced security.
Thank you for purchasing your Wireless
Security Keychain Remote from
RadioShack.
Please read this user's guide before
installing, setting up and using your new product
www.radioshack.com
49-1002
Press to arm your security system (door/window sensors,
motion detectors).
Press to disarm your security system.
on
off (A
B)
and
and
allow you to turn on and off up to two
devices that are connected to home automation modules,
such as a 61-3002 Lamp Module. Use this feature to turn lights
on and off while you are away from home.
what's included
keychain remote
Two CR2016 lithium batteries (installed)
registering your keychain remote
1. Press and hold down arm for 3-4 seconds,
and then release it.
Note: If you need to register the keychain
remote a second time, remove the batteries,
and then hold down arm for 3-4 seconds to
pick up a random code.
2. Press menu start
or
on your security
system console. ENTER PIN (Personal
Identification Number) appears on the
display.
3. Use the console keypad to enter your four-
digit PIN. * appears on the display as each
digit is pressed. After you enter your PIN, 1.
INSTALL appears.
4. Press ok and 1. INSTALL / ZONE appears.
5. Press any button on your keychain remote.
RMOT 1 SET appears on the console display
to confirm registration.
6. Press clear to return to the setup screen.
Press clear again to confirm your exit from
setup mode. Press 1 to return to the main
display, or press 2 to stay in setup mode.
See your Wireless Security Kit User Guide (49-
1000) for instructions on changing your PIN.

Advertisement

loading

Summary of Contents for Radio Shack Wireless Security Keychain Remote

  • Page 1 registering your keychain remote 49-1002 1. Press and hold down arm for 3-4 seconds, Wireless Security and then release it. Keychain Remote Note: If you need to register the keychain Use your wireless keychain remote to arm and disarm your Wireless Security Kit remote a second time, remove the batteries, (49-1000).
  • Page 2: Replacing The Batteries

    replacing the batteries arming/disarming your system FCC information Your keychain remote comes with two This equipment has been tested and found to arming the system comply with the limits for a Class B digital device, CR2016 button-cell batteries installed. If Press arm on your keychain remote.