3
C H A P T E R
The Composer interface and wizards are designed to help
you simplify the process to fully design, set up, and
program a Control4 system.
This chapter provides an introduction for how you can
configure a Control4 system using the Composer
software. The essential steps include:
1.
Design and Setup the System
2.
Set Up Media and Create Playlists
3.
Program the Home Automation System
For more detailed instructions and information, refer to the
Composer online help.
Design and Setup the System
Within Composer, there are two options that allow you to
design and set up Control4 systems, including:
Interviewer
The Main Composer Interface
TIP:
and Composer at any time during setup or at any time for
maintenance of the system after the initial setup.
Configure the System
You can go back and forth between the Interviewer
29