3.
To set LCD display preferences:
3a.
3b.
3c.
4.
Press the OK button to exit LCD Setup.
22
DHCP Server: If the network does not have
a device serving as the DHCP Server (such
as a network gateway, switch, or router),
then you may use the Media Controller as
the DHCP server. The following screen with
default settings is displayed. These will
work for most Control4 system users.
DHCP SERVER SETUP
IP
10.
MSK
255.
GWY
BEG
10.
END
10.
OK
Static IP: Choose this option if you do not
plan to use a DHCP solution. If you choose
this option, you must provide an IP address,
Mask (MSK), and Gateway (GWY) number.
STATIC IP SETUP
IP
10.
MSK
255.
GWY
OK
Press the LCD button on the front panel. The
LCD Setup screen is displayed.
Rotate the dial to select Brightness or Contrast
and then press the dial.
Rotate the dial to adjust the setting and then
press the OK button.
4.
4.
1
255.
0.
0
.
.
.
4.
4.
10
4.
4.
100
CANC
4.
4.
1
255.
0.
0
.
.
.
CANC
Need help?
Do you have a question about the Media Controller and is the answer not in the manual?