Section 2 - Installation
Installing the Software Drivers
This section explains how to install the cable modem using the USB Connections with the Windows
Vista
, XP, or 2000 operating
®
™
system (OS). Do not install these drivers if you are using the Ethernet connection.
Power on the computer. After windows boots up, insert the DCM-202 CD-ROM. If the Welcome window opens, click Close. Plug
the other end of the USB cable into an available USB slot on your computer. It is strongly recommended that you do not plug this
modem into an USB hub.
WINDOWS
VISTA
:
®
™
The Found New Hardware screen will appear. Click on Locate and install driver software
(recommended).
Click Next to continue.
D-Link DCM-202 User Manual
16