Verify The Tcp/Ip Configuration - D-Link DCM-202 User Manual

Section 2 - Installation
Before installing the modem using the Ethernet setup, you must verify that your computer has the TCP/IP protocol installed. Follow
the procedure for your operating system to verify or install the TCP/IP protocol.
To configure TCP/IP on your Windows
1. Right click on Start->Network and select Properties
2. On the the following pop up window, select Tasks->Manage network connections.
3. Right-click Local Area Connection and click Properties. Look for an entry named TCP/IP. If you see TCP/IP listed next to your
Ethernet hardware device, you can now go to the section "Connecting the Cable Modem." However, if TCP/IP is not listed, you
must complete the following steps.
• Scroll to the Internet Protocol version 4 TCP/IP option.
• Click to place a check mark in the Internet Protocol check box
• Click OK.
• You can now connect the cable modem.
To configure TCP/IP on your Windows 2000/XP PC:
1. Right-click the My Network Places icon on the Windows desktop.
2. Right-click Local Area Connection and click Properties. Look for an entry named TCP/IP. If you see TCP/IP listed next
to your Ethernet hardware device, you can now go to the section "Connecting the Cable Modem." However, if TCP/IP is
not listed, you must complete the following steps.
• Scroll to the Internet Protocol TCP/IP option.
• Click to place a check mark in the Internet Protocol check box
• Click OK.
• You can now connect the cable modem.
D-Link DCM-202 User Manual

Verify the TCP/IP Configuration

Vista PC:
® ™
11