Before You Begin; Local Cable Network Service; Prepare Your Workspace - D-Link DCM-202 User Manual

Broadband cable modem with usb & ethernet

Hide thumbs Also See for DCM-202:

Table of Contents

Section 2 - Installation

Before installing the modem:

• Remove any previous installations of wireless adapters

• Find the Serial Number, RF and Ethernet address located on a sticker on the cable modem and write them

here:

Serial Number S/N: ____________________

RF and ETH MAC: ____________________

• Contact your local cable service operator for Internet/cable network access. Your local cable operator will check

for cable access availability in your area, install a cable line (if necessary), provide you with an access account,

set up configuration and verify other technical details.

• Ask your local cable service provider about adding additional IP addresses to your account. See " Which Installation

to Use?" for more information.

To prepare your workspace:

• Position the cable modem so that it is located near the computer and the wall cable outlet. There should be plenty

of room to guide the cables away from the cable modem without crimping them.

Prepare the cable modem:

• For vertical installation: Place the cable modem securely in the included stand.

• For horizontal installation: Use the four included feet to install the cable modem. Remove the backing paper and

attach a foot to each of the corners on the cable modem; be sure to attach the feet on the surface that contains

the model information stickers, as shown.

• Do not restrict the airflow around the cable modem.

• To enhance the best performance and proper function of the cable modem, place it on a horizontal surface or

workplace and make sure that the cable modem does not move when it is operating.

D-Link DCM-202 User Manual

Before You Begin

Table of Contents