Network Overview; Installing The Hardware - D-Link DCM-202 User Manual

Broadband cable modem with usb & ethernet

Hide thumbs Also See for DCM-202:

Table of Contents

Section 2 - Installation

The diagram below displays the connect of your DCM-202 modem to your computer using the USB cable.

To install the hardware:

1. Connect the coaxial cable to the cable modem's CATV cable connector.

2. Connect the USB cable to the modem (not the computer).

3. Plug the power adapter into the modem. Plug the other end into a wall outlet or power strip.

D-Link DCM-202 User Manual

Network Overview

Table of Contents