Avery Dennison Monarch 9860 Quick Reference page 9

Hold the printhead assembly by the printhead tab while pressing down on the
13.
printhead release.
Close the printhead by pressing down on the thumb well until you hear it click
14.
into place. Close the cover.
P r i n t i n g
Before you print, make sure the printer is connected and ready to receive data.
Turn on the printer. The printer is ready to receive and print batches when you
1.
see "PRINT MODE
Download a format and a batch. Refer to the optional Packet Reference
2.
Manual for information on downloading print jobs.
The printer prints the format.
3.
Remove the printed supply. If the printer will be unused for extended periods
4.
of time, we recommend leaving the printhead unlatched.
C l e a r i n g J a m s
When you are printing and a jam occurs, an error appears on the keyboard.
Turn off the printer and open the cover and printhead assembly.
1.
If necessary, remove the supply roll and ribbon.
2.
Remove the jammed supply and reload the supply roll.
3.
Close the printhead assembly and turn on the printer.
4.
On the keyboard, press Feed (F) to position the supply under the printhead.
5.
K n i f e M a i n t e n a n c e
The knife alerts you when it requires maintenance. When the knife reaches three
million cuts and the printer is turned on, the keyboard briefly displays
Service Knife Soon
Each time you turn on the printer, this message appears and then disappears. Call
Service to schedule an appointment for knife maintenance.
If you ignore this message, the printer eventually displays "Knife Jam" and the knife
stops working. You must press Escape (E) to clear the error and the knife may
cut a few more tags before it stops working.
Ready" on the keyboard.
7