Avery Dennison Monarch 9860 Quick Reference page 7

A d j u s t i n g t h e W i d e / N a r r o w K n o b s
You may need to adjust the two wide/narrow knobs according to the width of your
supply. For supply that is more than two inches, adjust the knobs to the wide
setting. For supply that is two inches or less, adjust the knobs to the narrow
setting.
You must adjust both of the knobs to the
same position.
If you experience ribbon smudging in
cold, dry environments, adjust the
wide/narrow knobs to the wide setting.
For wide supplies, push down and turn
the wide/narrow knobs clockwise with a
screwdriver.
For narrow supplies, turn the
wide/narrow knobs counter-clockwise
with a screwdriver until it pops back up.
The adjustment is shown in the wide
position.
5