Avery Dennison Monarch 9860 Quick Reference page 14

755 Printhead is open. Close the printhead.
756 Load supplies.
757 Load supplies (supply length mismatch). Press Feed (F).
758 Either the supply is not seen, the on-demand sensor is broken, or a label
was removed too quickly. Check for a label jam or reload supplies.
763 Waiting to dispense label. Press Feed (F).
764 Verifier scan error. Press Escape (E) to clear the error and continue
printing.
765 The printhead has less than 8 bad dots and can shift bar code fields to
avoid bad dots. Press Escape (E) to continue printing.
768 Printhead has more than 8 bad dots within the format area or is not
connected. Connect printhead.
772 Verifier failure. Press Escape (E) to clear the error and continue
printing.
773 Verifier is not connected. Connect the I/O and/or serial cable to the
verifier.
P r i n t e r S p e c i f i c a t i o n s
Height:
Width:
Depth:
Weight:
Shipping Weight:
Power Source:
Speed:
Printhead:
Knife Style:
12
13.0 inches (330 mm)
15.0 inches (381 mm)
20.5 inches (521 mm)
45 lbs. (20 kg)
52 lbs. (24 kg)
90-132 V with autoselect 50/60Hz
A C
180-264 V with autoselect 50/60Hz
A C
Maximum print speed using the knife is 8.0 inches per
second
Thermal at 4 inches (1012 mm) wide
203 dpi (8.0 dots per mm)
Optional 300 dpi (11.8 dots per mm)
Linear