Avery Dennison Monarch 9860 Quick Reference page 3

This Quick Reference contains supply loading and general care and maintenance
procedures. For more detailed information, the Operator's Handbook is on the
enclosed CD-ROM or can be downloaded from our Web site (www.monarch.com).
Check our Web site for the latest release/addendum information.
C o n n e c t i n g t h e C a b l e s
The power supply automatically switches between 115V or 230V. There are no
operator settings required.
Plug the power cable into the socket. Plug the other end of the cable into a
1.
grounded electrical outlet.
Connect the communication cable into the appropriate
2.
port. Secure the cable with the connecting screws (serial)
or spring clips (parallel).
If you are communicating with the host through the serial
port, make sure the printer's communication values match
those at the host. The factory default values are 9600
Baud, 8 bit data frame, 1 stop bit, no parity, and DTR flow
control. Set the communication values on the printer to
match those at the host.
The printer also has a USB (Universal Serial Bus)
version 2.0 communications port, which is compatible with
version 1.1. Drivers are available on our Web site
for a variety of operating systems. These drivers
provide a Virtual Communications Port (VCP),
which looks like a normal serial port (for
example, COM1-4). After installing the
drivers, change the communications port
to the one allocated by the VCP driver.
Turn on the printer. Press ( I ) to turn on
3.
and ( O ) to turn off the printer.
Parallel Port
USB Port
Serial Port
Pow er Cable
Goes Here
1