Avery Dennison Monarch 9860 Quick Reference page 11

Moisten another cotton swab with isopropyl alcohol. Rub the cotton swab
5.
across the printhead and remove any build-up. You may need to use a
printhead CLEAN-STRIP if the printhead is extremely dirty or you see streaks
on the supply.
Rub the cotton
6.
any build-up.
Clean the build-up in the supply path.
7.
Let the printer dry before you reload s
8.
Close the cover and printhead assembly.
9.
Turn on the printer. On the keyboard, pre
10 .
under the printhead and through the knife
check digit packets.
swab across the supply sensor and die cut sensor and remove
upplies.
ss Feed (F) to position the supply
. Resend your format, batch, and
Printhead
Die Cut Sensor
Supply Sensor
9