Output Configuration; Analog - Omnia .11 Installation And Operation Manual

Output Configuration

All Output configuration settings can be found in the Basic tab on the Output screen.
Output metering can be found in both the Summary and Detail tabs. (See Output Metering below)
There are 6 selection buttons on the left side of the Menu area.
5 of these group the output controls that are displayed by output type and a 5
menu.
Touch the Output icon button to display the Input screen and then touch the Basic tab in the Menu area if it is not
already selected. The controls will be described by group below.

Analog

There are 4 controls in the Analog Output Level group:
Analog Output Submenu (Basic Tab)
th
button brings up the FM Options
Master controls the output level of both the left
& right channel analog XLR jacks
simultaneously.
Right Trim controls the level of the right
channel only over a limited + or – 3dB range to
correct left/right balance issues in the following
equipment. This is normally set to "0.0 dB".
De-Emphasis controls whether the analog XLR
outputs (when set to FM) are de-emphasized
(ON) or not (OFF).
Output Selection selects the processing channel
assigned to the analog output XLR jacks: FM,
HD or DJ.
21