Omnia .11 Installation And Operation Manual page 12

CE CONFORMANCE – This device complies with the requirements of the EEC Counc
Directives: 93 /68/EEC (CE Marking); 73/23/EEC (Safety – low voltage directive); 89/336/EEC
(e lectromagnetic compatibility). Conformity is declared to those standards: EN50081-1,
EN50082-1.
LITHIUM BATTERY CAUTION – There is a danger of explosion if the internal
battery is replaced incorrectly or shorted. R
equivalent type
a ccording to the m
USE OF SHIELDED CABLING –
High Frequency
connections.
NOTE: When the unit is operated in an extremely high RF environment, it may be
helpful to connect cable shields to the XLR-connector terminal that connects cab
sh ield to chassis
between XLR pin-1 and the chassis terminal may be helpful in some instances.
RoHS COMPLIANCE – The RoHS Directive stands for "the restriction of the use of certain
hazardous substances in electrical and electronic equipment". This Directive bans the placing o
the European market of new electrical and electronic equipment containing more than agreed
levels of lead, cadmium, m
p olybrominated diphenyl ether (PBDE) flame retardants. Omnia.11 FM is in compliance with
th e EU RoHS Directive.
recommended by the manufacturer. Dispose of used batteries
anufacturer's instructions.
In order to conform to the CE requirements for
radiation, shielded cables must be used for all audio and data
ground, not to pin 1. Additionally, a 0.01uF capacitor connected
ercury, hexavalent chromium, polybrominated biphenyl (PBB) and
x
eplace the battery only with same or
il
le
n