I/O Configuration File Transfer; Software Update Procedure - Omnia .11 Installation And Operation Manual

Presets are saved as small, text-based files with the ".opr" extension.
To upload a previously saved user preset to the Omnia.11, use the file entry box (or the browse button) to enter the
path to the preset file name to be uploaded a
The preset will be saved to the Omnia.11 with the same name as the selected file, m
N ote that uploaded presets will be placed in the Omnia.11's preset list but will no
I /O Configuration File Transfer
Similarly, I/O configurations can be saved to or loaded from your computer.
Shown below is the bottom half of the "File Transfer" screen, which is used for saving and loading I/O
configurations to and from your computer.
I/O Configuration download and upload operations work similarly to the Preset download and upload operation
described above with the exception that the filename extension for I/O configurations is ".oic".
S oftware Update Procedure
S oftware updates for the Omnia.11 are currently performed by swapping out the unit's internal compact flash
software card with a new one provided by Omnia Support.
T he compact flash card is located inside the top cover of the unit and that top cover must be removed to access it.
Full, illustrated instructions are provided with the update.
A future free so ftware update will allow updates going forward to be performed over the Ethernet remote control
c onnection using an update file downloaded from the Omnia website.
W e apologize for any i nconvenience this may cause in the meantime and sincerely Thank You for your patience as
n ew features are developed and incorporated into the Omnia.11.
Best Regards,
Team Omnia
nd press the "Upload" button.
69
inus the .opr extension.
t go directly on the air.
s