Detail Tab - Omnia .11 Installation And Operation Manual

HD OUTPUT shows the real-time peak output level of the "HD" channel before the output level controls
referenced to the maximum output level of 0 dBFS. Normally, these meters will be peaking all the way up near
0dBFS when the metered channel is active. These can be used as a quick way to check that the HD output channel is
active internally.

Detail Tab

There are 5 stereo output meters and a composite meter in the Detail tab:
Output Metering Screen (Detail Tab)
The 5 stereo output meters show the real-time peak level of the actual outputs after the output level controls in the
Menu screen.
Analog Shows the actual peak output level of the Left and Right analog XLR output jacks referenced to a "0" peak
level of +22 dBu.
AES/EBU
1 Shows the actual peak output level of the AES 1 XLR output jack referenced to 0 dBFS.
2 Shows the actual peak output level of the AES 2 XLR output jack referenced to 0 dBFS.
Livewire
1 Shows the actual peak output level of the Livewire 1 output referenced to 0 dBFS.
2 Shows the actual peak output level of the Livewire 2 output referenced to 0 dBFS.
Composite Shows the relative peak output of the composite MPX signal from the built-in stereo generator before
the composite output level controls relative to 100% modulation. Normally, this meter will be peaking all the way
up near 100%. This can be used as a quick way to check that the stereo generator output channel is active internally.
27