Chapter-1: Installation; Pre-Installation Tasks; About This Manual; Omnia.11 Components - Omnia .11 Installation And Operation Manual

Stereo fm audio processor

Hide thumbs Also See for .11:

Table of Contents

Chapter-1: Installation

Please take a few minutes to read through this chapter before proceeding with the installation of your new Omnia.11

processor.

The latest version of this manual is always available for download from the Omnia website here:

http://omniaaudio.com/manuals

By now, you've unpacked the shipping carton to gain access to this manual. Now is the time to inspect the Omnia.11

unit and its shipping carton for any signs of shipping damage. Such damage must be reported to your carrier for any

claims. The Omnia.11 shipping box includes the following components:

Omnia.11 processor.

Omnia.11 Operating Manual.

Warranty Registration Card. (Please complete the form and return/FAX it to Telos/Omnia)

Two IEC Power Cords, one of the USA/Canada style, and one of the Euro style.

The Omnia.11 subsystem is a DSP-based microcomputer, and therefore requires reasonably clean AC power, just as

any modern computer system does. And even though the Omnia.11 power supply is equipped with robust AC

transient suppression, we recommend that an "online" style (non-switching type) Uninterruptible Power Supply

(UPS) with transient surge suppression be employed.

At transmitter sites there can be heavy transients on the power lines as well as significant surges introduced into the

power system by frequent lighting strikes. These are unwelcome power line events and can damage even the most

robust equipment. Therefore you should give the AC power environment and installation practices thorough

consideration before plugging in the Omnia.11 (or any other microcomputer-based equipment).

A White Paper by one of our Support Engineers can be found on the Telos Systems website at the URL listed below.

It details proper grounding and contains links to some surge suppression products for both the power mains and the

often-neglected telephone, Ethernet and ISDN line connections that can (and do) conduct powerful surges into the

equipment.

http://www.telos-systems.com/techtalk/surge.htm

Table of Contents