Important Information - SMART Board In-WallRear Projection Installation Manual

Important Information

Please read this manual carefully before setting up and using the In-Wall Rear Projection SMART
Board™ interactive whiteboard. With proper care, your interactive whiteboard will provide years of
trouble-free service.
WARNING
WARNING
CAUTION
CAUTION
CAUTION
The projector behind the screen is a high brightness light source. Don't look directly
into the beam of light. Prevent children from staring directly into the beam of light.
To reduce the risk of fire or electric shock, don't expose this product to rain or
moisture.
Don't remove the protective cover from the back surface of the SMART Board
interactive whiteboard until you have completely installed it in the wall opening. If
this cover is accidentally removed, don't leave any fingerprints on the back surface.
If you do smudge the back of the screen, spray a soft cloth with alcohol-free glass
cleaner, and then gently and carefully dab the surface until the marks are removed.
Don't spray the cleaner directly onto the back of the screen.
Never, under any circumstances, apply isopropyl alcohol, water or acetone to the
back surface of the interactive whiteboard. These fluids could damage the diffusion
coating, resulting in a permanent deterioration in display quality.
Be very careful if you have to move or adjust the mirror stand after you have
removed the cross braces. Don't apply pressure to any part of the screen
opening—particularly to the upper corners.
You should avoid pushing the mirror stand because excessive pressure may cause
it to lose its square shape. If you do move or adjust the stand, either lift it from the
bottom or push it at the bottom.
If your interactive whiteboard included a projector, please note that this projector
has been designed for use under normal operating conditions only. Normal
operating conditions are defined as product use that does not exceed 8 hours per
day and 260 days per year. Exceeding these operating conditions could cause
projector damage. Damage caused by such extended use will not be covered by
the product warranty.
Important Information i