Husqvarna Viking Sapphire 875 Quilt User Manual page 19

6. Fix
By using the FIX button you can lock the stitch at the beginning
and/or at the end. The LED next to the button is lit when FIX is
activated. Press the FIX button to turn off the function.
The FIX function is automatically activated when a stitch is
selected or when STOP, the Selective Thread Cutter* or Stitch
Restart* has been used. You can turn off the automatic FIX
function in the SET Menu, see page 29.
The FIX function can be programmed (see page 26).
7. Reverse
Press the button while sewing and the machine will sew in reverse
until the button is released. Then your sewing machine will sew
forward. The LED on the button is lit when reverse is activated.
For permanent reverse, press the button once before starting
to sew. Your sewing machine sews in reverse until you press the
button again.
Reverse is also used when sewing buttonholes, bartacks, darning
and to begin and end tapering stitches* to step between the parts
of the stitch.
8. Selective Thread Cutter
Press the Selective Thread Cutter button and your machine
ties off the threads, cuts the top and bottom threads, raises the
presser foot and the needle, and activates the FIX function for
the next start. To cut threads at the end of a stitch or stitch
program, press Selective Thread Cutter while sewing. The LED
next to the button starts ashing indicating that a cut is requested.
When the stitch or stitch program is completed, the upper thread
and bobbin will be cut.
The Selective Thread Cutter function can be programmed (see
page 26).
After a buttonhole or an eyelet is sewn, your
NOTE:
machine cuts automatically. Automatic Selective Thread
Cutter can be cancelled in the SET Menu, see page 29.
9. Start/Stop
(Only on 875 Quilt)
Press this button to run and stop the machine without the foot
control. Press the button once to begin sewing and press again to
stop sewing.
*Only on 875 Quilt
Operating the machine
(Only on 875 Quilt)
2
19