Sewing Mode, 855/875 Quilt - Husqvarna Viking Sapphire 875 Quilt User Manual

Sewing Mode, 855/875 Quilt

Sewing Mode is the rst view on the GraphicDisplay after you turn
on the machine. Here you will nd all the basic information you need
to start sewing. This is also the menu where you adjust the settings of
your stitch. Straight stitch is selected by default.
1. Recommended needle for the selected fabric.
2. Recommended presser foot for the selected stitch.
3. The sewing speed is indicated by three, or, for 875 Quilt, ve levels
shown on the GraphicDisplay. Reduce or increase the speed by
pressing the SPEED button or, on the 875 Quilt: SPEED+ or
SPEED– buttons.
4. The fabric and sewing technique selected on the Exclusive
SEWING ADVISOR™ feature.
5. Recommended thread tension for the selected fabric and stitch.
The recommendation is only shown on the 835 and 855 models.
On the 875 Quilt model, the tension is set automatically.
6. The selected stitch, both illustrated and displayed by number.
7. Stitch length. Reduce or increase the stitch length by pressing the
Stitch Length – and + buttons.
8. Needle position is shown instead of stitch width when straight
stitch is selected, or on 875 Quilt, when the Alternate View button
is pressed. Change the needle position by pressing the Stitch Width
– and + buttons.
9. Indicates that the function Mirror end to end* is activated
10. Indicates that the function Mirror side to side is activated.
11. Indicates that the stitch can be tapered when a Decorative
Tapering Stitch* is selected. Press the CLR button to open a view
with tapering settings.
12. Indicates that tapering beginning* is activated and the type of
angle.
13. Indicates that tapering end* is activated and the type of angle.
14. When sewing a manual buttonhole, the darning program or
tapering stitches*, the reverse icon is shown to indicate that you
need to press the reverse button when the buttonhole columns, the
darning stitch or the tapering stitch* are sewn to the desired length.
15. Stitch density is shown instead of stitch length when a buttonhole,
bartack or darning stitch is selected or when a satin stitch is
selected and the Alternate View button is pressed. Reduce or
increase the stitch density by pressing the Stitch Length – and +
buttons.
16. Stitch width. Reduce or increase the stitch width by pressing the
Stitch Width – and + buttons.
17. Buttonhole size indication when using the Sensor One-Step
Buttonhole Foot. Set the size of the button by pressing the up and
down arrow buttons.
18. Recommendation to use stabilizer under your fabric.
19. The icon for lowering the feed teeth is shown when free motion is
activated or sewing on buttons is selected.
20. Set the number of stitches to sew on the button by pressing the up
and down arrow buttons.
21. Recommendation to use the multipurpose tool/button reed when
sewing on a button. Place the thin end of the multipurpose tool/
button reed under the button when sewing on light fabrics. Use
the thick end for heavier fabrics.
*Only on 875 Quilt
Operating the machine
1
2
3
Normal Sewing Mode, Straight stitch
12
9
3
875 Quilt, Normal Sewing Mode, Decorative
stitch
Manual Buttonhole
Sensor One-Step Buttonhole
19
Sewing on button
4
5
6
7
8
2
13
10
11
14
15
16
17
18
20
21
23