Unpacking; Packing Away After Sewing - Husqvarna Viking Scandinavia 400 User Manual

Embroidery Unit
35. Embroidery arm
36. Embroidery Hoop attachment
37. Embroidery unit socket
38. Release button

Unpacking

1. Place the machine on the table or
cabinet, remove the packaging.
2. Remove the side parts of the
packing material and the foot
control.
3. The machine is delivered with a
soft plastic cover, an accessory bag,
a main cord and a foot control
cord. There is also a test kit for
embroidery and a bag containing
embroidery accessories (see page
26).
4. Wipe the machine, particularly
around the needle and needle plate
to remove any soil before sewing.

Packing away after sewing

1. Unplug the cords from the wall
socket and the machine.Wind the
cords around your hand and place
the foot control cord in the foot
control storage space. Place the
foot control as illustrated. Lower
the presser foot. Remove the
embroidery card.
2. Slide the cover over the machine.
Place the main cord in the pocket
of the cover. There is also space
provided for the operating manual,
the embroidery accessories and the
other accessories.
Learn your Scandinavia 400
38
Some fabrics have a lot of excess
dye which can cause discoloration
on other fabric but also on your
sewing machine. This discoloring
may be very dif cult or impossible
to remove.
Fleece and denim fabric in especially
red and blue often contain a lot of
excess dye.
If you suspect that your fabric/ready-
to-wear garment contains a lot of
excess dye, always pre-wash it before
sewing/embroidering to avoid the
discoloring.
35
36
37
5