Removing The Engine Guard; Installing The Engine Guard - KTM Freeride 350 EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.46

Removing the engine guard

12.47

Installing the engine guard

–
Remove screws
–
Lower the engine guard at the rear and remove it toward the front.
B01072-10
–
Position the engine guard on the frame at the front and mount screws
tighten yet.
–
Position the engine guard on the frame at the rear and mount and tighten
screws .
2
Guideline
Remaining screws, chassis
–
Tighten screws
Guideline
Remaining screws, chassis
B01072-10
and .
1 2
.
1
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
60
but do not
1