Sub-Zero PRO 48 Use & Care Manual page 9

PRO 48 Use & Care
Freezer Storage
ADJUSTABLE SHELVES
The adjustable shelves of the PRO 48 upper freezer
compartment are cantilevered and 100% stainless steel.
The freezer shelves are repositioned the same way as the
glass shelves in the refrigerator compartment. To remove
or adjust the freezer shelves, first tilt the shelf up at the
front, then lift it up and out of the tracks on the rear wall of
the freezer.
To replace a shelf, insert in the tracks on the rear wall of
the freezer with the front of the shelf raised slightly. As you
push the shelf in, lower the front of the shelf until it locks
into position.
ICE BUCKET REMOVAL
The automatic ice maker and stainless steel ice bucket are
located in the lower freezer drawer.
To remove the ice bucket, pull the freezer drawer out until
it stops, lift the ice bucket up and out of the drawer. The
entire lower freezer drawer can now be used for more ice
storage if necessary.
Storage Drawers
DRAWER REMOVAL
The refrigerator and freezer storage drawers are remov-
able for cleaning. The drawers have an automatic stop
built in to prevent drawers from coming all the way out of
the unit.
To remove, pull the drawer all the way out until it stops, lift
up evenly on both sides of the drawer front and pull out.
To reinstall, raise the front of the drawer and place onto
the drawer slide tracks. Be sure to engage the front of
the drawer slide with the drawer assembly. Refer to the
illustration below.
IMPORTANT NOTE: To reduce the weight of the drawer, be
sure to unload the contents before removing the drawer.
Storage drawers are heavy. Be sure to keep your feet
clear as you remove the drawer.
Storage drawer removal.

subzero.com