Sub-Zero PRO 48 Use & Care Manual page 8

PRO 48 Use & Care
Refrigerator Storage
ADJUSTABLE GLASS SHELVES
The adjustable glass shelves of the PRO 48 upper refriger-
ator compartment are cantilevered and spill proof with
stainless steel trim.
To remove a shelf, tilt the shelf up at the front, then lift it
up and out of the tracks on the rear wall of the refrigerator.
To replace a shelf, insert in the tracks with the front of the
shelf raised slightly. As you push the shelf in, lower the
front of the shelf until it locks into position. Refer to the
illustration below.
IMPORTANT NOTE: Use care when handling glass shelves
to prevent breaking the glass or scratching the interior.
ADJUSTABLE SLIDE-OUT BINS
The PRO 48 features two versatile, adjustable stainless
steel slide-out bins that fit neatly under any refrigerator
compartment shelf. The glass shelves have integrated rails
that make it possible to position the slide-out bins in a
variety of locations.
To remove the slide-out bin, pull the handle of the bin
forward until it stops, lift it up and out of the rails mounted
below the glass shelf. Refer to the illustration below.
Adjustable glass shelf. Adjustable slide-out bin.
CRISPER LID
The PRO 48 upper refrigerator drawer features a tight-
sealing crisper lid for higher humidity storage in the
drawer compartment. This clear lid provides visibility and
easy access to the compartment.
To remove the crisper lid assembly, pull the upper refriger-
ator drawer all the way out, raise the front edge of the
crisper lid up and pull out from the back. Refer to the illus-
tration below.
STORAGE DRAWER DIVIDERS
The PRO 48 refrigerator storage drawers give you full
access to food with adjustable and removable dividers.
The dividers are interchangeable between the upper and
lower refrigerator drawer. Two long dividers run the full
depth of the drawer, with shorter dividers that connect to
the long dividers to compartmentalize the drawer.
To remove the short dividers, lift up and out of position
from supports on the long dividers and sides of the
drawer. The long dividers can also be removed by lifting
up and out of position from drawer support tabs. Refer to
the illustration below.
Storage drawer with crisper lid.
8