Using The Treadmill Safety Clip - Precor P10 Operating And Maintaining

34

Using the Treadmill Safety Clip

The treadmill is equipped with three different stop functions,
which behave as follows:
If the user ...
Pulls on the lanyard
attached to the safety
clip and trips the
restart switch
Presses down on the
red STOP button
Steps off of the
running belt for a
preset amount of
time
The restart switch and the red STOP button are located just
below the console, as shown in the following figure. When the
switch is tripped, the button pops up. The treadmill does not
operate until the button is returned to its normal position.
Figure 6: Restart switch
Operating and Maintaining the P10 Console
Then the And the console ...
treadmill
belt ...
Slows to a Shows the words PUSH THE
stop RESET SWITCH. On some
console models, an arrow
points toward the Restart
switch.
Slows to a Shows that the exercise
stop workout is paused.
Slows to a Shows that the exercise
stop workout is paused.