Using The Treadmill Safety Clip - Precor P10 Operating And Maintaining

68

Using the Treadmill Safety Clip

The treadmill is equipped with three different stop functions,
which behave as follows:
If the user ...
Pulls on the lanyard
attached to the safety
clip and trips the
restart switch
Presses down on the
red STOP button
Steps off of the
running belt for a
preset amount of
time
The restart switch and the red STOP button are located just
below the console, as shown in the following figure. When the
switch is tripped, the button pops up. The treadmill does not
operate until the button is returned to its normal position.
Figure 36: Restart switch
Assembling and Maintaining TRM 800-Series Treadmills
Then the treadmill
belt ...
Slows to a stop
Slows to a stop
Slows to a stop
And the console ...
Shows the words PUSH
THE RESET SWITCH.
On some console
models, an arrow
points toward the
Restart switch.
Shows that the exercise
workout is paused.
Shows that the exercise
workout is paused.