Removal Of Convertible Coupe Body Window And Frame; Removal Of Convertible Coupe Body Door Latch; Removal Of Convertible Coupe Body Window Regulator - Plymouth Pl4S Service Manual

~
I
BODY
75
and outer ferrule. Pull the valve out toward
dash. To disassemble the valve, remove the
check nut at the stem end and pull out the
valve
plu~ger.
30. REMOVAL OF CONVERTIBLE
COUPE BODY WINDOW AND
FRAME.
1940-42-Remove the garnish molding
and arm rest. Remove the regulator and
door lock handles and trim panel. Remove
the stops on front and rear window frame
support. Remove the clip pins from the slid-
ing arms, spring the arms out of slots in
frame and lift out the window.
31. REMOVAL OF CONVERTIBLE
COUPE BODY DOOR LATCH.
1940-42-Remove the window glass.
Remove the door handle and lock cylinder.
Remove the window glass rear channel. Dis-
connect the remote control and remove the
latch attaching screws. Remove the latch
and remote control arm (fig. 56).
Figure 56-Removing Convertible Coupe Door
Latch Assembly
(1940-42
.Models}
32. REMOVAL OF CONVERTIBLE
COUPE BODY WINDOW
REGULATOR.
1940-42-Remove the window glass.
Turn the regulator to the "up" position and
remove the screws that hold the plate to
door. Hold the arms together and slide the
regulator to the rear to remove the roller
from guide rail, then remove the regulator.
from door.