Fuses - Mercedes-Benz Sprinter Operator's Manual

X
Insert new bulb ;.
X
Align and engage lamp housing : on the
right-hand side.
! Have the bulbs for the overhead control
panel interior lights changed at a qualified
specialist workshop which has the
necessary specialist knowledge and tools
to carry out the work required. We
recommend an authorized Sprinter Dealer
for this purpose.
You could otherwise damage the overhead
control panel.
Rear interior lights K 15 W
Interior light with switch
Interior light without switch
X
Switch off the lights.
X
Press in the latching spring of lamp
housing : with a suitable implement, e.g.
a screwdriver.
X
Pry off lamp housing :.
X
For interior lights without a switch, fold
back protective cover =.
Electrical system
X
Pull bulb ; out of the bulb holder.
X
Insert new bulb ;.
X
For interior lights without a switch, fold
back protective cover =.
X
Align lamp housing : on the left-hand side
and engage.
Rear interior lights W 5 W
X
Switch off the lights.
X
Undo screws : and remove the lamp lens.
X
Push bulb ; into the bulb holder and
remove by turning counter-clockwise.
X
Push new bulb ; into the bulb holder and
screw in by turning clockwise.
X
Position the lamp lens and tighten
screws : again.

Fuses

i Blown fuses must be replaced with fuses
of the same rating (which can be
recognized by the color and amperage) and
which have the amperage specified in the
fuse allocation chart. An authorized
Sprinter Dealer will be happy to advise you.
G
Warning!
Only use fuses approved for Sprinter with the
fuse rating specified for the respective
239
Z