Display Message - Mercedes-Benz Sprinter Operator's Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

Troubleshooting
206
Display messages
b
Brake force
distribution
b
Brake force
distribution Visit
workshop
c
Parking brake
Release brake
7
Seatbelt sys.
Visit workshop
?
Coolant Stop, turn
engine off
?
Coolant Stop, turn
engine off
Possible causes/consequences and M Solutions
G
Warning!
EBD has been deactivated due to undervoltage.
The battery might not be charging.
The rear wheels could lock sooner than expected when you apply
the brakes.
X
Pull over immediately, paying attention to road and traffic
conditions.
X
Do not continue driving.
X
Visit a qualified specialist workshop.
G
Warning!
EBD has malfunctioned.
The rear wheels could lock sooner than expected when you apply
the brakes.
X
Pull over immediately, paying attention to road and traffic
conditions.
X
Do not continue driving.
X
Consult a qualified specialist workshop.
A warning tone also sounds.
You are driving with the parking brake applied.
X
Release the parking brake (
G
Warning!
The belt system has malfunctioned.
X
Visit a qualified specialist workshop as soon as possible.
The coolant temperature is too high.
X
Pull over immediately, paying attention to road and traffic
conditions.
X
Consult a qualified specialist workshop.
The coolant temperature is too high.
If the vehicle is stopped after being subjected to extreme loads
(e.g. driving in mountainous terrain, trailer towing, etc.), this
display message may be shown when the ignition is switched on
or the engine is restarted.
X
Run the engine for approximately one minute at idling speed.
X
Consult a qualified specialist workshop if the display message
continues to be shown.
Y
page 112).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sprinter 2013Sprinter 2500Sprinter 3500

Table of Contents