Mercedes-Benz Sprinter Operator's Manual page 239

X
Switch off the lights.
X
Undo screws : and remove the rear lamp
lens in the direction of the arrow.
X
Pull the connector off the bulb holder.
Retaining lugs
;
Brake lamps
=
Standing lamp/tail lamp
?
Backup lamps
A
Turn signal lamps
B
Rear fog lamps
C
X
Release retaining lugs ; and take the bulb
holder out of the rear lamp cluster.
X
Turn the bulb counter-clockwise by
pressing lightly and pull it out of the bulb
holder.
X
Press a new bulb into the bulb holder and
screw in clockwise.
X
Press the connector into the bulb holder.
X
Insert the lamp lens.
To do this, clip the bulb holder into the three
holes provided at the side and tighten
screws :.
Electrical system
License plate lamp
X
Switch off the lights.
X
Insert a screwdriver or similar implement
into recess ; and carefully pry off lamp
lens :.
X
Pull the bulb out of the bulb holder.
X
Insert a new bulb.
X
Align lamp lens : and clip it in so that it
engages.
Changing the rear bulbs (platform)
Screws
:
Lamp lens
;
Perimeter lamp/standing lamp
=
Turn signal lamps
?
Brake lamps
A
Tail lamp
B
Rear fog lamp
C
License plate lamp
D
Backup lamps
E
X
Switch off the lights.
X
Undo screws : and remove lamp lens ;.
237
Z