Message Memory - Mercedes-Benz Sprinter Operator's Manual

On-board computer with steering wheel buttons
78
X
Press & or * to select the desired
station.
i It is only possible to store new stations
using the audio system. See the separate
operating instructions.
You can also operate the radio in the same
way as usual.
Operating the CD player
Using the steering wheel buttons
X
Switch on the radio (see the separate
operating instructions) and select the CD
player.
X
Press the V or U button repeatedly
until the settings for the current CD appear
in the display.
Current CD (with CD changer)
:
Current track
;
X
Press & or * to select a CD track.
Message memory menu
The on-board computer stores certain display
messages. In the Message memory menu,
you can call up stored display messages.
G
Warning
The on-board computer only records and
displays malfunctions and warnings from
certain systems. For this reason, you should
always make sure that your vehicle is safe to
use. You could otherwise cause an accident
by driving an unsafe vehicle.
Using the steering wheel buttons
X
Press the V or U button repeatedly,
until the number of stored display
2 messages, appears in the
messages, e.g.
display.
If no malfunctions have occurred, the
messages
message appears.
X
Press & or * to scroll through the
stored display messages.
Potential display messages are described
in the "Practical advice" section
Y
( page 201).
X
Press the V or U button to change
to a different display.
i
The message memory is cleared when
you switch off the ignition.
Settings menu
You will find two functions in the
To reset: Press the 0
menu: the
button for 3 sec.
can reset all settings to the factory defaults.
You will also find submenus which you can
use to make individual settings on the vehicle.
Using the steering wheel buttons
X
Press the V or U button repeatedly
Settings
until the
display.
Settings menu
Resetting all settings
You can reset the functions in all submenus
to the factory settings.
No
Settings
function, with which you
menu appears in the