Enabling Autopilot Functions; Enabling Ais Functions - Raymarine e7 Installation Instructions Manual

5.7 Enabling autopilot functions

With the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Autopilot Control.
4. Select the On or Off option as appropriate.
5. Use the Back button to return to the System Settings menu.
6. Select Pilot Controls.
If this menu option is disabled, no autopilot has been found.
Check the physical connections, then repeat steps 1 to 6.
7. The Pilot Control dialog is displayed, indicating that pilot control
is enabled and an autopilot is detected.
86

5.8 Enabling AIS functions

Before proceeding ensure AIS unit is connected to NMEA Port 1.
With the homescreen displayed:
1. Select Set-Up.
2. Select System Settings.
3. Select NMEA Set-Up.
4. Select NMEA Input Port 1.
5. Select the AIS 38400 option.
6. Use the Back button to return to the System Settings menu.
7. Select External Devices.
8. Select the AIS unit.
The Track Targets menu is displayed.
9. Adjust the AIS options as appropriate.
e7 / e7D — Installation instructions