Raymarine e7 Installation Instructions Manual page 43

Digital radar cable extension
For longer cable runs a radar power and data digital cable extension is required.
1. Radar extension cable.
2. Radar power and data digital cable.
3. Raymarine network switch (or crossover coupler if connecting radar directly to display).
4. RayNet cable.
Note: The extension cable connects to the radar scanner.
Note: The power connection is NOT shown in the diagram. If using an Open Array scanner a VCM (Voltage Converter Module)
must be connected between the scanner and the power supply.
Cables and connections
1 2
3
4
D12152-1
43