4.4 Attaching the rear bezel
The rear bezel must be fitted before mounting the unit on the
supplied trunnion bracket.
1. Remove the front bezel. Refer to the separate instructions
provided for that procedure.
2. Place the bezel over the rear of the display, ensuring that it is
correctly aligned with the display. Apply firm but even pressure
to the bezel along the:
i. Outer edges - work from the sides upwards and then along
the top edge, to ensure that it clips securely into position.
ii. Inner edges - ensure that the bezel sits flat against the unit.
3. Use the supplied screws to secure the bezel to the display.
70
1
4.5 Bracket (trunnion) mounting
The display can be mounted on the supplied bracket.
Before mounting the unit ensure that you have:
• Selected a suitable location.
• Identified the cable connections and route that the cables will take.
• Attach the front bezel.
D12183-1
e7 / e7D — Installation instructions