Nmea 0183 Connection - Raymarine e7 Installation Instructions Manual

3.10 NMEA 0183 connection

1 2 3 4
7 8 9 10
NM EA DEVICE
4800 / 9600 / 38400 baud
56
5
11 12
NM EA DEVICE
4800 / 9600 / 38400 baud
D12169-1
NMEA 0183 devices are connected using the supplied power and
data cable.
The display has 2 NMEA 0183 ports:
• Port 1: Input and output, 4800, 9600 or 38400 baud rate.
• Port 2: Input only, 4800, 9600 or 38400 baud rate.
Note: The baud rate you want to use for each port input must be
specified in the System Settings menu (Homescreen: > Set-up
> System Settings > NMEA Set-up > NMEA Input Port).
Note: For Port 1, both the input and output communicate at the
same baud rate. For example, if you have one NMEA 0183
device connected to the display's Port 1 INPUT, and another
NMEA 0183 device connected to the display's Port 1 OUTPUT,
both NMEA devices must be using the same baud rate.
You can connect up to 4 NMEA 0183 devices to the display's NMEA
0183 OUTPUT (Port 1). You can connect a total of 2 NMEA 0183
devices to the display's NMEA 0183 INPUT (Port 2).
e7 / e7D — Installation instructions