Warning - Airbag Deployment Zones - Police - Chrysler 300M Service Manual

8O - 4 RESTRAINTS
RESTRAINTS (Continued)
1 - FRONT SEAT BACK PANEL
2 - LEFT SEAT AIRBAG MODULE
3 - HOLE PROVIDED IN SEAT BACK FOAM FOR SEAT AIRBAG
MODULE
4 - SIDE AIRBAG MODULE NYLON SLEEVE
WARNING - AIRBAG DEPLOYMENT ZONES -
POLICE
WARNING: IT IS CRITICAL THAT WHEN INSTALLA-
TION OF SPECIAL EQUIPMENT ON POLICE VEHI-
CLES IS DONE, THE SPECIAL EQUIPMENT DOES
NOT INTERFERE WITH ANY OF THE AIRBAGS OR
AIRBAG DEPLOYMENT ZONES.
THE IGNITION MUST BE OFF WHILE WORKING ON
OR AROUND ANY AIRBAG SYSTEM COMPONENTS.
DO NOT DISTURB OR MODIFY THE MOUNTING OF
THE OCCUPANT RESTRAINT CONTROLLER TO
ENSURE PROPER IMPACT SENSING.
There are three zones to be aware of:
(1) Driver Airbag Deployment Zone (Fig. 2), (Fig.
3) and DRIVER AIRBAG/STEERING WHEEL SPEC-
IFICATIONS table
(2) Passenger Airbag Deployment Zone (Fig. 4) and
(Fig. 5)
(3) Driver and Passenger Seat Airbag Deployment
Zone (Fig. 6)
DRIVER AIRBAG/STEERING WHEEL
SPECIFICATIONS
DRIVER AIRBAG CUSHION POSITION
DAB DIAMETER WHEN
FULL
DAB DEPTH WHEN
FULL
MAXIMUM REARWARD
DISPLACEMENT
DURING FILL
STEERING WHEEL TILT POSITION RANGE
10.4 DEGREES - 29.6 DEGREES FROM VERTICAL
20.0 DEGREES FROM VERTICAL IS THE NOMINAL
POSITION
28 INCHES
12 INCHES
13.8 INCHES
5 - SEAT BACK TRIM COVERS
6 - SEAT BACK CUSHIONS
7 - SEAT BACK FRAMES
8 - RIGHT SEAT AIRBAG MODULE
Fig. 2 DRIVER AIRBAG DEPLOYMENT ZONE
1 - VERTICAL PLANE PASSING THROUGH CENTER OF DRIVER
AIRBAG COVER
2 - 350 MM
3 - VERTICAL PLANE PASSING THROUGH MAXIMUM
REARWARD POINT THAT THE DRIVER AIRBAG CUSHION
REACHES
4 - STEERING WHEEL
5 - DRIVER AIRBAG RETAINER/HOUSING
6 - DRIVER AIRBAG CUSHION
LH