Chrysler 300M Service Manual page 65

2 - 32 REAR SUSPENSION
REAR SUSPENSION (Continued)
1 - STRUT ASSEMBLY
2 - REAR SUSPENSION CROSSMEMBER
3 - REAR SUSPENSION CROSSMEMBER BUSHING
4 - LATERAL LINKS
CAUTION: If the vehicle is equipped with the Tire
Pressure Monitoring (TPM) System, the tire/wheel
assembly needs to be reinstalled in the same loca-
tion it is removed from or the TPM System (sen-
sors) will need to be retrained. Mark each tire/wheel
assembly indicating location, prior to its removal. If
the tire/wheel assemblies are switched, rotated or
replaced, the TPM System needs to be retrained.
(Refer to 22 - TIRES/WHEELS/TIRE PRESSURE
MONITORING/SENSOR - STANDARD PROCEDURE)
Fig. 1 Rear Suspension
5 - HUB AND BEARING
6 - STABILIZER BAR
7 - TRAILING ARM
8 - SPINDLE
CAUTION:
becomes bent, damaged or fails, no attempt should
be made to straighten or repair it. Always replace
with a new component.
If a rear suspension
LH
component